Skip to content
Plas-Labs PCR Chamber with HEPA Filtration | 36″ wide
Item#: 825-PCR-HEPA36The PLAS-LABS' PCR Chambers are designed to help improve the accuracy of P.C.R. and general tissue culture procedures. The chance for air borne contamination during D.N.A. sequencing is greatly reduced.
The chambers are a “still air enclosure” which contains both our “Bright Light” illumination system and a U.V. germicidal lamp. The U.V. germicidal system is rated at 254 nm and will decontaminate all exposed surfaces in the interior. The lamp timer should be activated 15 minutes before and 15 minutes after each use. The front viewing panel and main housing are .375” (9.5 mm) thick optically clear material. This thickness helps to prolong the service life (about 2,500 operating hours) of the unit. The front viewing panel Catalog #825-UV(FS) is attached by six (6) screws and is easily and quickly replaced, if needed. Access to the interior of the chamber is gained by pulling swinging doors outward.
- Exterior Dimensions: 25" D x 39.5" W x 32" H (635mm x 1003mm x 813mm)
- Interior Dimensions: 22.5" D x 37.5" W x 23.5" H (572mm x 953mm x 597mm)
- Electrical Requirements: 115-120 Volts, 60 Hz. 12 Amps
- Approximately nine (9) cubic feet of capacity. Able to accommodate nearly 200 plates.
- Eight (8) adjustable interior shelves.
- Extra large U.V. emitting light for increased sterilization.
- New larger HEPA filter and blower
- “Bright Light” illumination system (40,000 hour lamp guarantee).
- Two bright white plastic (adjustable) shelves. One is tooled to store pipettors.
- Front panel is .375” thick (9.5 mm) for Beta Ray protection. NOTE: Not Gamma Rays.
- Removable side access doors with slip apart hinges.
- Proximity sensors on doors for operator safety.
- Automatic timer to activate U.V. sterilization procedures.
- Bottom tray has a formed in place “spill guard” for easy-cleaning.
- The U.V. system is rated at 254 nm.
- Standard 24 month warranty (Not gloves or consumables).
- Side and back walls are one piece formed optically clear acrylic .375” thick (9.5 mm).
- Main housing and top are removable for installation of large pieces of equipment.
