Labconco FreeZone 12 Liter -50C Console Freeze Dryer with Stoppering Tray Dryer
Item#: 701221010FreeZone 12 Liter Console Freeze Dryers with Stoppering Tray Dryers are designed for lyophilizing moderate to large loads and stoppering vials or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum pump (sold separately). The console's upright stainless steel collector coil is capable of holding 12 liters before defrosting. A single 1 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58° F), suitable for aqueous samples.
The Stoppering Tray Dryer features three 16.5" x 12" processing shelves. A single 1 hp HCFC/CFC-free refrigeration system and 1000-watt electric heater cool and heat the fluid medium circulating through channels in the shelves. Lyo-Works™ OS provides a real time display of freeze dryer and tray dryer parameters on a 5" full color, capacitive touch screen. Freeze Dryer models with PTFE-coated collectors that can withstand corrosive compounds are available.
- Weight: 698.0 lbs
- Weight metric: 316.6 kg
- Dimensions: 32.4" w x 29.6" d x 63.7" h
- Dimensions metric: 82.2 w x 75.1 d x 161.7 h cm
- Electrical: 230V, 60 Hz, 9A (console); 230V, 60 Hz, 9A (tray dryer)
- Region: U.S. and Canada, International
- Collector Temperature: -50° C, -58° F
- Conformance: CAN/CSA C22.2, UL
- Ice Holding Capacity: 12L
- Options Included: Stoppering Tray Dryer
- Plug Type: North America, 230V
- Style: Console
- Vacuum Pump Displacement Required: 163L/min or larger displacement
- Upright stainless steel collector coil capable of holding 12L of ice before defrosting. Acrylic collector lid, 3/4" thick, has neoprene gasket.
- Console cabinet with interior space for vacuum pump (sold separately) and two-piece, removable front panel with viewing window.
- Clear acrylic chamber lid, 3/4" thick, with neoprene gasket.
- FreeZone Stoppering Tray Dryer.
- Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents.
- Full color, 5" capacitive touch screen with Lyo-Works™ OS:
- Real time display of collector temperature, vacuum level, and optional End-Zone™ end point detection system.
- Start–up mode for collector cool-down and vacuum pull-down (automatic or manual).
- Operating mode (standby or run).
- Vacuum set point, alerts, diagnostic tests, user manual, defrost control, and optional drying accessory parameters.
- Data logging stores and displays data in table or chart format, and may be exported via USB or Ethernet.
- Settings include language (English, Spanish, French, German, or Italian), time, time zone, temperature (° C or ° F), and vacuum (mBar, Torr, or Pa).
- Alerts are programmable to send via Ethernet connection to user-entered email addresses.
- Display settings include brightness, touch sounds (on/off), and screen time out in minutes (on/off).
- Maintenance alert settings include vacuum pump oil change, refrigeration cleaning, total operating hours and line voltage offset.
- Level-specific security lock-out prevents changes to programs and other system parameters.
- Hot gas defrost with auto shut off at +60° C (+140° F).
- On/standby switch.
- Moisture sensor that prevents refrigeration or vacuum start-up when moisture is detected in the drain line.
- Vacuum control valve that maintains vacuum level set point.
- Vacuum break valve that bleeds air into the system when power to the freeze dryer or vacuum pump is shut off. If a power outage less than approximately 5 minutes occurs, the freeze dryer will restart and the refrigeration and vacuum system will resume operation once power is restored. If the power failure is more than approximately 5 minutes and the collector warms above safe limits, the freeze dryer will not automatically restart.
- Side-mounted USB port and rear-mounted Ethernet connection.
- Front-mounted, quick-disconnect drain hose fitting and side-mounted lanyard with hose connector. 18", 1/4" ID silicone tubing and clamp included.
- Internal electrical receptacle for vacuum pump connection.
- 3-wire electrical cord with plug.
- 3/4" OD vacuum connection, 36" of 3/4" ID vacuum hose and two clamps.
Options Include
- PTFE-coated collector coil and chamber for processing involving corrosive compounds.
- Purge valve for isolating the vacuum pump from the freeze dryer.
- Region-specific electrical plug configurations.
Required Accessories (Not Included)
- Vacuum pump with a displacement of at least 163 L/min, 0.002 mBar ultimate pressure and fitting suitable for 3/4" ID vacuum hose.
- Freeze dry glassware if not bulk freeze drying.
Labconco FreeZone Console Freeze Dryer with Stoppering Tray Dryer- Datasheet
DownloadLabconco Freezer Dryers & Accessories Brochure
DownloadLabconco FreeZone® Console Freeze Dryer with Stoppering Tray Dryer User Manual
DownloadLabconco Freeze Dryers Installation Guide
DownloadLabconco FreeZone Triad Freeze Dryer
How to Program and Operate your FreeZone Freeze Dryer with Lyo-Works Operating System
How to Set Up Your Console FreeZone Freeze Dryer
FreeZone Stoppering Tray Dryer Setup
How to Choose the Right Freeze Dryer
Request a Proposal
Related Products
-
Item #: 700201000Item #: 700611000Item #: 710201000Item #: 700621000Item #: 720401000
Submit a PO
Looking to submit a purchase order rather than buying online? Click on the Submit a PO button to learn more.
Sales & Support
Customer Service
Mon - Fri: 8AM to 5PM ET
101 Witmer Road, Suite 700
Horsham, PA 19044
Contact Sales
Need more information?
Would you like us to get in touch with you? Fill out the form below and we will contact you.