Skip to content
D1000 Handheld Homogenizer
Item#: D1000The D1000 handheld homogenizer is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1ml to 250ml (depending upon the generator probe used).
The D1000 is a rotor stator homogenizer and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds or less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting.
$1,332.31 $1,132.46
- Speed Range: 8,500 to 30,000 rpm
- Capacity: 0.1 to 250ml
- Noise level: <70db
- Operating Temperature Range: +4°C to +65°C
- Dimensions (without generator): 9"H x 1.8"W x 2.3"D
- Weight: 1.35 lbs
- Voltage: 115V, 60Hz
- Warranty: 2 years
- Homogenize most samples in under 30 seconds
- For volumes from 100ul to 250ml
- Supplied with both 5mm and 7mm generator probes
- Ergonomic, "slim-line" handle design
-
Saw Tooth Generator Probe for 50 to 205ml Vessels (14 x 130mm)
Item #: D1000-M14$1,229.10$1,044.74 -
Saw Tooth Generator Probe for 15 & 50ml Tubes (10mm x 115mm)
Item #: D1000-M10$411.18$349.50 -
Stand for D1000 Handheld Homogenizer
Item #: D1000-ST$550.74$468.13 -
Saw Tooth Generator Probes for Microtubes (7 x 50mm)
Item #: D1000-M7$732.43$622.57 -
Flat Bottom Generator Probe for Microtubes (5 x 50mm)
Item #: D1000-M5$690.31$586.76
